Panasonic BB-HCA10CE Installationsanleitung Seite 2

Installation Guide
Ceiling Flush Mount Bracket
Model No.
Please read this document before using the product, and save this document for future reference.
Panasonic Network Camera Website: http://panasonic.net/pcc/ipcam/
Please read the Operating Instructions included with the camera before proceeding.
• This document (Installation Guide) explains how to install the BB-HCM527 Network Camera using the
Ceiling Flush Mount Bracket, and install the bracket in a ceiling.
Abbreviations
• The Ceiling Flush Mount Bracket is referred to as "the bracket" in this document.
• The Network Camera is referred to as "the camera" in this document.
Preparation
1. Confirm the following items are included in the bracket's packaging.
Ceiling Flush Mount Bracket
(1 pc.)
Ceiling Mounting Cover (1 pc.)
Order No. PQKL10092Z1
Used when mounting the camera
on a ceiling.
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the bracket when
mounting it.
2. You will need the following additional items to install the bracket.
– 1 anchor bolt and 2 nuts (see step 2 and 6 on page 4)
2
BB-HCA10CE
Washer (1 pc.)
Order No. XWG4F16VW
Used when securing the safety wire
to the ceiling.
Screw A (1 pc.)
Order No. XTB4+20AFJ
Used to secure the safety wire to
the ceiling.
Connector Cover (1 pc.)
Order No. PNHX1058Z
Used to protect the cables when
mounting the camera.
Indoor Use Only
Template (1 pc.)
Order No. PNPD1087Z
Used as a references when
making a hole in the ceiling.
Screw B (4 pcs.)
Order No. XYN4+F6FJ
Used to secure the camera
(3 pcs.) and the safety wire (1 pc.)
to the bracket.
Installation Guide
(this document) (1 pc.)