Back Panel & Connectors - imacon Flextight Precision II Anwenderhandbuch

Back Panel & Connectors
Figure 2: Back panel features of Flextight Precision II
SCSI Address Selector: to assign an address, use a screwdriver to
A
aim the arrow at an address number.Use only 0, 1, 2, 3, 4, 5, or 6. Do
not use 7, 8, or 9. See Figure 4 for a detailed illustration.
B Power Cable Socket: plug the power cable into this socket.
C SCSI Port 1: plug a SCSI cable here and connect it to your com-
puter. Most SCSI devices include two identical SCSI connectors. Fit
the last unit in the SCSI chain with a terminator on its free connec-
tor.
D SCSI Port 2: identical to SCSI Port 1.
E Slots for Opening Side Bays: you only need to open the side bays
if you need to replace a light tube. See ÒThe Light TubesÓ on
page 25 for instructions.
Imacon Flextight Precision II UserÕs Guide
Hardware ReferenceÑFlextight Precision II
Back Panel & Connectors
A
B
C
D
E
9