Panasonic JS-960WS Serie Bedienungsanleitung Seite 34

2nd Display Unit Installation
(6) Follow steps (7) and (8) of "Storage Unit Replacement (Stand Unit)" to reattach the
rear cover.
(7) Fix the DVI cable to the large bracket using the large clamp, and fix the DC cable to
the large bracket using the small clamp.
p Fix the cables so that they do not protrude from the 2nd display.
(8) Attach the large bracket installed on the 2nd display to the small brackets, and tighten
the two thumbscrews to secure it.
p Be sure to tighten the thumbscrews by hand.
p Make sure that the 2nd display unit is firmly attached and there is no looseness.
(6)
Rear cover
34
(7)
Small clamp
Large clamp
(8)
Thumbscrews