Panasonic JS-960WS Serie Bedienungsanleitung Seite 29

(5) Open the eject lever of the new storage unit. Pull down the eject lever, insert it
completely into the HDD slot, and then pull up the eject lever.
(6) Align the right side cover with the tabs on the front cover (3 locations), and turn the
right side cover to close it. Then secure the right side cover with the 2 screws that
were removed in step (3).
p Make sure that the tabs of the front cover (3 locations) and the tabs of the right side
cover (2 locations) removed in step (3) are firmly locked into place.
(7) While pressing part 1 of the rear cover towards the main body, press part 2 downwards.
(8) Carefully place the main body on a level surface, and then slide the rear cover lock
levers on the bottom of the main body (2 locations) towards the inside. Slowly return
the main body to its original state.
(5)-1
(6)-2
(8)-2
(5)-2
(7)
2
1
(6)-1
Front
cover
Tabs
(8)-1
29