Storage Unit Replacement (Stand Unit) - Panasonic JS-960WS Serie Bedienungsanleitung

Storage Unit Replacement (Stand Unit)

Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
(1) Carefully place the main body on a level surface, and then slide the rear cover lock
levers on the bottom of the main body (2 locations) towards the outside.
(2) Slowly return the main body, lift up the underside of the rear cover, and remove the
rear cover.
(3) Remove the 2 screws that secure the right side cover, and then release the right
side cover tabs (2 locations). In this condition, open by removing the right side cover
completely.
(4) Pull down the storage unit eject lever, and remove the storage unit.
(1)
Rear cover lock levers
(3)-2
28
(2)
(4)
Tabs
(3)-1
Eject lever
Screws