Adjustment Of The Spring Balancer - EFA SB 322 E Betriebsanleitung

4.3 Adjustment of the spring
balancer
The spring balancer setting is fine-tuned by
means of the PLUS/MINUS screw on its
housing (see Fig. 12).
Fig. 12: Spring balancer
Turn the screw in MINUS direction until the
saw is hanging freely in equilibrium (with
the spring balancer) at working height.
If the saw cannot be pulled out, the spring
balancer is jammed and a readjustment is
necessary:
Turn the screw in PLUS direction until the
saw can be pulled out and start the fine
adjustment again (see above).
Schmid & Wezel
D-75433 Maulbronn
Page
41 of 58
Version 1
07.2012