Adjusting The Spring Balancer - EFA SB 326 E Originalbetriebsanleitung

5.4 Adjusting the spring balancer

The fine adjustment of the spring balancer is ef-
fected via the PLUS/MINUS screw on its hous-
ing (see Fig. 12 Spring balancerFig. 12).
Fig. 12 Spring balancer
 Turn the screw in MINUS direction until the
cutter is hanging freely in equilibrium (with
the spring balancer) at working height.
If the cutter cannot be pulled out, the spring bal-
ancer is jammed and a readjustment is neces-
sary:
 Turn the screw in PLUS direction until the
saw can be pulled out and start the fine ad-
justment again (see above).
Schmid & Wezel Seite / Page
24 / 34
Stand / Version
07 / 2017