Heidolph Hei-VAP Value Originalbetriebsanleitung Seite 22

Operation
Adjust heating bath temperature: Hei-VAP Value, Hei-VAP Digital
Device is switched on.
Heating bath is lled with water or oil.
Evaporating ask is immersed into heating bath.
Set temperature with temperature knob.
Press heating key
The heating key is illuminated as long as the heating function is on.
Control light „heating" is lit as long as device heats up and set temperature has not
been reached yet.
Press heating key
et heating bath
Device is switched on.
The frame blinks over previously selected medium "oil" or "H 2 O".
Select your heating bath uid within 10 seconds.
The frame jumps to the eld "temperature .
After 10 seconds of inactivity, the frame over heating bath uid
disappears.
If you still need to select the heating bath uid, switch device o
on again.
Adjust heating bath temperature: Hei-VAP Advantage
„bath temp" is selected.
Enter desired temperature and con rm.
Press heating key
Heating key is illuminated as long as heating function is on.
Actual temperature is shown under „bath temp".
Adjust temperature via bath temp
Press heating key
With heating bath uid water temperatures above 100 C are not
permitted due to safety reasons. Please use oil as heating bath uid if
you adjust temperatures above 100°C.
to start heating.
to stop heating.
uid (Hei-VAP Advantage only
to start heating.
to stop heating.
eld.
and