PEAKnx wantec Monolith C IP Bedienungsanleitung Seite 21

VoiP-Software Bria Solo Free
To use „Voice over IP" on the touch panel, you need a running instance of Bria Solo Free.
This VoiP software appears when a call from the door station is made and pops up, even
with the visualization running. So you can see the camera image and answer the call at the
same time.
14. On the panel, go to https://www.counterpath.com/plan-select-solo/.
15. Tap on „Continue with Bria Solo"
16. To use the software, you must first create an account.
17.
VoIP will then be set up. Select „Configure SIP Settings".
18. For the „Domain" enter the IP address of your Fritzbox and for „SIP Username" and
„Password" enter the user name and password which you have assigned for the Cont-
rolmini in the Fritzbox/SIP server.
■
Your login data can also be found under fritz.box -> Telephony devices, if you edit
the created Controlmini (IP telephone) and switch to the „Login data" tab. The IP
address of the fritzbox is the same as „Registrar".
EN Set up of an wantec doorstation with a PEAKnx touch panel
www.peaknx.com
21