Specifications - Makita DDF470 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery capacity
4-1. Switch trigger

SPECIFICATIONS

Capacities
-1
No load speed (min
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted
according to EN60745:
Model DDF470
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DDF480
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
5-1. Lamp
6-1. Reversing switch lever
7-1. Speed change lever
8-1. Adjusting ring
8-2. Graduation
8-3. Arrow
Model
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
noise level determined
) : 73 dB (A)
pA
) : 74 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
DDF470
13 mm
38 mm
10 mm x 90 mm
0 - 1,550
0 - 400
185 mm
1.6 kg
BL1430 / BL1440
D.C. 14.4 V
ENE034-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Driver Drill
Model No./ Type: DDF470, DDF480
3
9-1. Sleeve
10-1. Groove
10-2. Hook
10-3. Screw
11-1. Bit holder
11-2. Bit
M6
1.5 kg
BL1815 / BL1815N /
BL1820
DDF480
13 mm
38 mm
10 mm x 90 mm
M6
0 - 1,550
0 - 400
185 mm
1.7 kg
BL1830 / BL1840 /
BL1850
D.C. 18 V
ENG901-1
ENH101-17