Herunterladen Inhalt Inhalt Diese Seite drucken

Personal Safety Precautions - Herth+Buss Reanimator Surge Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating Instruction
2.2.10 Working in the vicinity of lead acid
EN
batteries is dangerous. During normal
operation,
batteries
gases. For this reason, it is extremely
important that you follow the instructions
every time you use the Reanimator.
2.2.11 The Reanimator, the charger and the
lead acid battery must be set up in a well-
ventilated location.
2.2.12 Ensure that the Reanimator and the
charger are placed on a dry, non-flammable
surface.
2.2.13 In order to minimise the risk of a battery
explosion, please follow these instructions
in addition to those published by the battery
manufacturer and the instructions from the
manufacturers of devices which are intended
for use in the vicinity of the battery. Observe
the safety notices on these products and on
the engine.
WARNING
Attention: Do not use the Reanimator
with batteries which cannot be
recharged. Only use the Reanimator
with rechargeable lead acid batteries.
Do not use with dry cell batteries,
such as those often used in household
appliances. Such batteries may burst
and thereby cause physical injury or
material damage.
www.herthundbuss.com
generate
explosive

2.3 Personal safety precautions

WARNING
Risk of explosive gases

Sparks in the vicinity of a battery can

cause it to explode
To reduce the risk of sparks developing
in the vicinity of the battery:
2.3.1 NEVER smoke near a battery or an
engine or cause sparks or start a fire.
2.3.2 Please remove all personal effects
made from metal, such as rings, bracelets,
necklaces and wristwatches, when working
with a lead acid battery. A lead acid battery
can generate a short circuit that is sufficiently
powerful to weld a ring or similar metallic
object, which can cause serious burn
injuries.
2.3.3 Exercise particular caution to prevent
metallic objects from falling onto the battery.
These may cause sparks or short the battery
or other electrical components and trigger
an explosion.
2.3.4 To prevent sparks, ensure that the
clamps NEVER touch each other or come
into contact with the same metallic object.
95980800
18

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis