Herth+Buss Reanimator Surge Bedienungsanleitung Seite 15

Operating Instruction
LED voltage indicator
LED control lamp
FAULT/BYPASS/GLOW
GLOW switch
ON/OFF switch
Open-end wrench,
size 10/13 mm
LED control lamp:
FAULT/BYPASS/GLOW
LED lights up green:
Device charged and
ready for operation
LED flashes red/green:
GLOW mode is activated
15
5 V USB charging
connection
Charging cable
for cigarette lighter
LED flashes green:
BYPASS mode is being
activated
LED lights up red:
Reversed polarity, short
circuit or battery voltage
below 3 V
12 V/10 A charging connection
Barrel connector socket
Battery connection
pliers
95980800
EN
Technical data: