General Information; Intended Use; Device Description; Performance Data - Herth+Buss Reanimator Surge Bedienungsanleitung

Operating Instruction

1. General information

EN

1.1 Intended use

The Reanimator Surge is used to jump-start
all passenger cars with combustion engines
and a 12 V vehicle electrical system. Vehicles
that have ground to a halt due to a weak or
discharged battery can therefore be started
with the assistance of the Reanimator Surge.

1.2 Device description

In contrast to conventional assisted start de-
vices, this device does not have an internal
battery. Very powerful capacitors instead
serve as power accumulators. These can
store and then dispense the power required
to start the engine in a very short time. The
device functions entirely off-grid and can
even be charged using the residual power
from the discharged vehicle battery in the
worst-case scenario.
Lightning-fast charging
Compatible with all 12 V starter systems
Entirely maintenance-free
Microprocessor controller
Safe spark suppression,
no arcing
Can be used down to -40 °C
No loss of power in the event of frost
www.herthundbuss.com

1.3 Performance data

Rated voltage:
Peak current:
Temperature range:
Dimensions L x W x H:
95980800
12 V
800 A
-40 °C to 65 °C
235 x 190 x 63 mm
14