Motorola PMMN4059 Bedienungsanleitung Seite 8

Transmitting
Connecting the PSM to the radio does not totally disable the
radio's microphone and PTT.
Removing the PSM from the Radio
1. Remove the PSM connector from the radio side
connector.
2. Remember to keep the rubber seal inserted in the
PSM's 3.5 mm jack when a secondary accessory is not
being used.
SERVICE
Other than the replaceable cable assembly, clip and antenna,
the PMMN4059/PMMN4060/PMMN4061 Public Safety
Speaker Microphones are not repairable. Replacement of the
new cable assembly must be done at Motorola Service
Centers to ensure correct placement of the cable assembly to
the PSM housing.The following optional accessories and
replacement parts are available for order from Motorola's
Radio Products and Services Division (RPSD) or Motorola
Accessories & Aftermarket Division (AAD).
6