Date/Time Setting - Olympus c-4000 zoom Anleitung

GETTING STARTED (Cont.)
En

Date/time setting

1
Set the mode dial to P.
2
Press
● The monitor turns on automatically and the top menu appears.
3
í
Press
4
ñ
Press
5
Ññ
Press
6
When
format.
● Select any one of the following formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the procedure used when the
date and time settings are set to Y-M-D.
7
í
Press
8
Ññ
Press
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
● The first two digits of the year cannot be changed.
● The camera can only display the time in "number of hours", or what is
commonly known as military time. Consequently, 2 p.m. would be 14:00
hours, or 12:00 hours + 2:00 hours =14:00 hours.
9
Press
● If
is pressed again, the menu will disappear.
● For a more accurate setting, do not press
00 seconds. The camera's built-in clock starts when you press this
button.
0
To turn the camera off, set the mode dial to OFF.
● The date setting will be canceled if the camera is left with no batteries for
approximately 1 hour. If this happens, you will need to set the date again.
14
.
on the arrow pad to select MODE MENU.
to select SETUP, then press
to select , then press
is selected on the screen, press
to move to the year (Y) setting.
to set the year. When the year is set, press
.
í
.
í
.
Ññ
É
.
until the time is actually at
Note
to select the date
í
to move to