Exposure Compensation; Manual Focus - Olympus c-4000 zoom Anleitung

ADVANCED SHOOTING (Cont.)
En
Macro mode shooting
Focusing is usually slow when you get close to a subject. However, in the
mode focusing is performed quickly. The
shoot close to the subject (within 20 cm – 80 cm (7.8" – 31")). When the
zoom lever is pressed to the maximum W position, you can fill the entire
frame with your subject.
Press the
metering+Macro mode) appears.
When is activated, you can shoot from as close as 2 cm (0.7") to your
subject. In the
MENU"

Exposure Compensation

This function allows you to make fine changes to the present exposure
setting. In some situations, you may get better results when the exposure that
the camera sets is compensated (adjusted) manually. You can adjust
between +/–2.0 in 1/3 steps.
Adjusts towards –
(images become darker)

Manual focus

1
Hold down
When the focus distance selection screen appears on the monitor,
í
press
2
Ññ
Press
● During operation, you can enlarge the area you are focusing on. This lets
check the image area that the camera actually records. The lengths shown
are for reference only. When the length indicator is moved to less than 80 cm
(31"), the bar display automatically switches to the 20 cm (7.8") – 80 cm
(31") bar display.
3
Hold down
4
Shoot.
● Focus is locked at the distance you have set.
5
To cancel the saved MF setting, hold down
second to display the focus distance selection screen.
6
To return to the AF mode, press
32
Mode dial
setting
button repeatedly until
mode, normal shooting is also possible.
É
Mode dial
setting
for more than 1 second.
to select MF.
to select the focus distance.
for more than 1 second to save the setting.
(macro) mode allows you to
(Macro mode) or
Mode dial
setting
Adjusts towards +
í
(images become brighter)
É
to select AF, then press
(Spot
~
"USING THE
again for more than 1
.