Behringer XD80USB Bedienungsanleitung Seite 12

22 XD80USB
XD80USB Getting started
Getting started PLAYING
(EN)
Play the kit and adjust the volume in your headphones
or external sound system to a safe listening level.
1. Assemble the drum kit as shown in the
Each drum head or cymbal can give diff erent sounds
assembly instructions and tighten
depending on where it is hit:
all connections.
Crash and Ride
Choke
Bow
Snare and Toms
2. Connect the cables to the drum pads,
cymbals and foot pedals, as shown in the
hook-up diagram.
Rim
3. Connect headphones or make connections to
any external sound equipment such as an
external amplifi er, or active speaker. See the
Hi-Hat
hook-up diagrams for some ideas.
Phones
Phones
Power DC IN
Adapter
4. Connect the power supply adapter to the local
Bow Shot with:
mains supply. This universal adapter can accept
Pedal Open
mains voltages from 100 VAC to 240 VAC.
Pedal Half Open
Connect the DC output to the drum module.
Pedal Closed
5. Do not turn on the drum module until all
Pedal Only: Press down for "Chick"
connections have been made.
6. Turn down the VOLUME control on the drum
module, and turn on the POWER switch.
Kick
Kick
7. If you are using external sound equipment,
turn it on after the drum module. At the end of
the session, turn any external sound equipment
off fi rst.
NORMAL or LEARNING
1. Press and hold PAGE/SELECT to enter the
NORMAL mode or LEARNING mode. (An LED
shows the mode.) Note: If you are practicing or
scoring in LEARNING mode, press PLAY/
PRACTICE or START/STOP to stop the play fi rst.
NORMAL
SONG KIT VOICE
PATTERN RHYTHM BEAT
LEARNING
PAGE/SELECT
KIT
Edge
1. In NORMAL mode, press KIT until NUM
is displayed.
Head
2. Press + or – to select from 10 preset kits,
or 5 user kits U11 to U15. Play each kit to hear
how it sounds.
Bow
3. Press KIT or PAGE/SELECT to display other kit
options: NUM, VOL, REV, EQH, EQM, EQL
4. Press + or – to adjust the range of each option.
The settings aff ect all pads of the kit.
Press down and quick-release
for "Splash"
5. The settings will not be saved unless you save
them as a new user kit: Press SAVE/ENTER and
press + or – to choose from U11 to U15.
Press SAVE/ENTER again to save the new
user kit.
23 Quick Start Guide
SONG VOICE
1. In NORMAL mode, press SONG until NUM is You can change the sound (voice) of each pad, and
displayed, then press START/STOP to play the save the settings as a new user kit.
current song.
1. In NORMAL mode, press VOICE until NUM
is displayed.
2. Press + or – to select from 60 diff erent songs.
2. Press the pad button of the drum or cymbal
you want to change.
3. Press SONG or PAGE/SELECT to display other
song options: NUM, ACC, DRM
4. Press + or – to adjust the range of each option.
3. Press + or – to choose from 175 diff erent
sounds. Press the pad to listen. The Hi-Hat has
four options.
5. Press START/STOP to start or stop the song.
4. Press VOICE or PAGE/SELECT to display other
6. Press TEMPO and press + or – to adjust voice options: NUM, VOL, PAN, PIT, REV,
the tempo. MID, P--S, P--N, H--C
DRUM OFF
5. Press + or – to select the value of each option.
1. In NORMAL mode, press DRUM OFF to mute/
unmute the drum track from the SONG.
6. When you like the way the pads sound, you can
save this as a new user kit. Press SAVE/ENTER
and press + or – to choose from U11 to U15.
Press SAVE/ENTER again to save the new
user kit.
CLICK
1. In NORMAL mode, press CLICK to start the
metronome, and press again to stop.
2. Press PAGE/SELECT to display the metronome
options: SIG, INT, VOL, VOC
3. Press + or – to select the range.
4. Press TEMPO, then press + or – to adjust.
5. Press CLICK again to stop the metronome.
RECORD
You can record your playing, either on your own or
playing to a song. The drum track can be turned off .
Your playing and the song will be recorded, but not
the internal drum track or metronome.
1. In NORMAL mode, press RECORD to enter the
recording mode.
2. Press PAGE/SELECT to display recording
options: SNG, KIT, DPM, SIG, INT, DRM, PRC
3. Press + or – to select the range.
4. Press START/STOP or hit a drum to start
the recording. Press again to stop.