Manual Tuning - Yamaha R-S300 Bedienungsanleitung

FM/AM TUNING

Manual tuning

Manual tuning is effective when station signals are weak.
1
Rotate the INPUT selector on the front panel
(or press FM or AM on the remote control) to
select TUNER as the input source.
Note
If you press FM or AM on the remote control to select TUNER as
the input source, the corresponding band is also selected,
therefore you may skip step 2.
2
Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
3
Press TUNING jj / ii on the front panel to
manually tune in to the desired station.
Note
When you tune in to a station, the frequency of the received
station is shown in the front panel display.
18
En
INPUT selector
TUNING jj / ii
FM, AM
FM, AM
■ Improving FM reception
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
B / C / D / E
ENTER
RETURN
OPTION
1
Press OPTION on the remote control when
this unit is tuned in to an FM radio station.
The Option menu for TUNER is displayed (see page
30).
2
Press B / C on the remote control to select
"FM Mode", and then press ENTER.
y
To cancel the operation and return to the Option menu, press
RETURN on the remote control.
3
Press D / E on the remote control to select
"STEREO" (automatic stereo mode) or
"MONO" (monaural mode).
• When MONO is selected, FM broadcasts will be
heard in monaural sound.
• When STEREO is selected and an FM station with
a stereo broadcast is tuned in, the broadcast will be
heard in stereo.
4
To exit the Option menu, press OPTION or
RETURN on the remote control.
Note
The STEREO indicator on the front panel lights up while
listening to a station in stereo.