Concept VK571 series Bedienungsanleitung Seite 35

EN
ADDITIONAL DISPLAYED INFORMATION
If "Lo" sign appears on the display (Fig. 1) or the display does not display anything after
turning the appliance on, the batteries are flat and must be replaced with new ones.
If "EEEE" sign appears on the display (Fig. 2) the appliance has been overloaded
and may be damaged. Immediately reduce the amount of food.
COUNTDOWN TIMER SETTING
1. In the time display mode, press the SET/UNIT button to enter the countdown timer
function, or press and hold the SET/UNIT button for 2 seconds. The default setting
is 1 minute (Fig. 3).
2. Press the SET/UNIT button to enter the countdown function. Press the ON/ZERO
button to set minutes. Each time you press the SET/UNIT button, you will increase
the countdown time by one minute (Fig. 4). Press and hold the SET/UNIT button,
you can speed up the increasing of the countdown time.
3. Press the ON/ZERO button to set seconds. Each time you press the SET/UNIT button,
you will increase the countdown time by one second (Fig. 5). Press and hold the
SET/UNIT button, you can speed up the increasing of the countdown time. Press
the ON/ZERO button to start the countdown.
CANCELING COUNTDOWN TIMER
1. During the countdown, press the SET/UNIT button to stop the countdown. Press the SET/UNIT button again to
restart the countdown.
2. During the countdown, press the SET/UNIT button to stop the countdown. Press the ON/ZERO button to reset the
data.
Press and hold the ON/ZERO button for 2 seconds and the time will appear on the display.
AUDIO SIGNALISATION
A sound signal appears when the countdown is complete. The sound signal takes one minute.
Press the SET/UNIT button again to restart the countdown. Press the ON/ZERO button to reset the original values.
VK571x
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
35