Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Gnd
When using the manual operation, do not activate the actuator electrically.
If the actuator can no longer be activated electrically, the manual operation can still be used to open and close the
motor. Use a battery drilling machine and the 6mm/0.24inch hexagonal pin supplied. Place the hexagonal pin in
the drill head, then insert it into the back of the actuator (see figure).
When disposing the LM.125 / .250 please comply with all relevant requirements and regulations applicable in your
country.
g
11
Werbung
