Vox (Voice Operated Transmission) - Radioddity FS-T2 Benutzerhandbuch

Number Value Number Value Number
9 051 35 205
10 053 36 212
11 054 37 223
12 065 38 225
13 071 39 226
14 072 40 243
15 073 41 244
16 074 42 245
17 114 43 246
18 115 44 251
19 116 45 252
20 122 46 255
21 125 47 261
22 121 48 263
23 131 49 265
24 132 50 266
25 134 51 271
26 143 52 274
11
Value Number Value
61 351 87 565
62 356 88 606
63 364 89 612
64 365 90 624
65 371 91 627
66 411 92 631
67 412 93 632
68 413 94 654
69 423 95 662
70 431 96 664
71 432 97 703
72 445 98 712
73 446 99 723
74 452 A1 731
75 455 A2 732
76 462 A3 734
77 464 A4 743
78 465 A5 754

VOX (Voice Operated Transmission)

VOX is convenient to start a conversation without pressing the PTT button. The transceiver automatically
switches to Transmission Mode when the VOX will activate the transmit mode to transmit the signal
when you are speaking to the microphone.
1. When operating the VOX function, be sure to set the VOX gain level which allows the transceiver
to recognize the sound.
2. If the microphone is too sensitive, the transceiver will begin transmitting when there is noise in the
background.
If it is not sensitive enough, it will not pick up your voice when you are speaking. Be sure to adjust the
VOX gain level to an appropriate sensitivity to allow smooth transmission.
In standby mode, press [POWER/MENU] key for 3 times to enter VOX setting, then the "VOX" icon
will display on the LCD screen.
Press [UP] or [DOWN] to select OFF/1/2/3
Press [POWER/MENU] to enter the next menu, or press [PTT] to save the new setting and back to
the standby mode, you can also wait for 8 seconds and it will be saved automatically.
Tip: Select appropriate parameters according to the noise situation of the use environment:
3= high sensitivity, suitable for low background noise.
2= medium sensitivity, suitable for most situations.
1= low sensitivity, suitable for loud background noise.
12