Vibration Specifications; Scope Of Supply; Safety Devices - Mafell K 55 18M bl Originalbetriebsanleitung

2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2

Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.5 Scope of supply

Portable circular saw K 55 18M bl complete with:
1 carbide-tipped circular saw blade Ø 168 mm (6 39/64 in.), 24 teeth
1 riving knife/splitter (thickness 1.2 mm / 3/64 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety instructions"
1 carrying case
1 chip bag
1 charger APS 18M for Art.No. 91B501, 91B521, 91B525
2 rechargeable batteries 18 M 99 LiHD for Art.No. 91B501, 91B521, 91B525
Cross-cutting system KSS50 18M bl complete with:
1 carbide-tipped circular saw blade Ø 168 mm (6 39/64 in.), 32 teeth
1 riving knife / splitter (thickness 1.5 mm / 0.06 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety instructions"
1 carrying case
1 charger APS 18M for Art.No. 91B601, 91B621, 91B625
2 rechargeable batteries 18 M 99 LiHD for Art.No. 91B601, 91B621, 91B625

2.6 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
L = 90 dB (A)
PA
K = 3 dB (A)
PA
L = 101 dB (A)
PA
K = 3 dB (A)
PA
.
2
- Upper stationary saw guard
- Lower retractable saw guard
- Large base plate
- Handles
- Riving knife / splitter
- Index mechanism and brake
- Hose connector
-23-