Special Safety Instructions - Probuilder 99007 Gebrauchsanweisung

Special safety instructions

Before use, check that the mounted saw is
securely attached to the mitre saw stand.
Follow the safety instructions that apply to
the saw you use along with the mitre saw
stand.
Assembly
1. Place the frame (1) on a mat or similar
so that it does not get scratched. Tilt the
frame legs fully out. Insert a bolt through
each leg and secure it with a washer
and knob (5) through the bracket on the
frame.
5
2. Insert the rollers (7) into the holders at
each end of the mitre saw stand and
screw them tight using a � nger screw (2).
7
2
GB
19