Albrecht AE 6890 Bedienungsanleitung Seite 30

Priority Channel,
Memory Channels,
Audio Filter and
CTCSS
Volume and Squelch
Rotary Knob
Your CB radio can always be switched between 6 different country versions. To switch you need to
hold one or two buttons on the front side while you turn on the radio with the ON/OFF button.
Afterwards you release the pressed button(s). The programmed country code is saved as long as
you program another country code or until the device is disconnected from the power supply.
The factory setting, in which your radio will start after the first connection to 12 V, may be different
for delivery in specific countries.
When first turned on, radios sold in Germany and most other countries will start with the AM/FM
programming:
•
dE 80/40 80 channels FM and 40 channels AM. The pre-programmed channel is channel
9 , so the device starts directly on the international trucker- and emergency channel. Shortly
after turning on the device "dE" is displayed.
This programming is only allowed in Germany and Czech Republic and must not be used in any
other country (in the Czech Republic only FM is allowed).
•
EU 40/40 40 channels FM and 40 channels AM. The pre-programmed channel here is also
channel 9 in AM, so the device starts directly on the international trucker- and emergency
channel. Shortly after turning on the device "EU" (for Europe) is displayed.
Operation
LCD Channel &
Status Display
Single Function Buttons
Dimmer – Dual Watch – Frequency - Local/DX - Channel 9
Channel Display
Programming the country-settings
10
Power, AM-FM,
Auto-Squelch,
Mic-Gain and
Beep Tones
Rotary control
Channel and Scan