Replacing The Fuse; Technical Specifications - EuroLite MF-11 Bedienungsanleitung

There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Sound-control:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Dimensions (LxWxH):
Weight:
Fitting lamp:
OSRAM ELC 64653HLX A1/259 24V/250W GX-5.3
PHILIPS ELC 24V/250W GX-5.3 1000h
SYLVANIA ELC 24V/250W GX-5.3 1000h 50mm
Please note: Every information is subject to change without prior notice. 04.05.2009 ©
230 V AC, 50 Hz ~
280 W
via built-in microphone
: 45° C
a
(steady state): 85° C
B
0.5 m
0.1 m
F 3 A, 250 V
215 x 270 x 195 mm
5 kg
18/33
Article No.:
88264010
88264215
88264220
00046464.DOC, Version 1.0