Cleaning The Spray Arms; Cleaning Tips; Cleaning The Door - KKT KOLBE GS63VI Benutzerhandbuch

Maintenance and cleaning

6.2 Cleaning the spray arms

The spray arms should be cleaned regularly to avoid clogging
of the nozzles in the spray arms and the bearing with hard
water deposits.
• To remove the spray arm, first unscrew the nut and remove
the washer, which is placed on the upper part of the spray
arm.
• Remove the spray arm gently upwards to remove the lower
spray arm.
• Spray the spray arm with hot water and soap to clean the
nozzles using a fine brush.
• Rinse the spray arm thoroughly and then reassemble at the
designated place.

6.3 Cleaning tips

When cleaning the operation panel or operating parts, never use
!
abrasive cleaners or polishes for furniture care.
• Please wipe the control panel please only with warm water and a
damp, clean wiping cloth.

Cleaning the door

• Only use a soft, damp cloth for cleaning the door edge.
• Any cleaner in spray cans shouldn't be used.
• For indoor and outdoor areas do not use abrasive cleaners as
they may damage them.
Other cleaning tips
• If you don't use the dishwasher for a longer time (for example
when you're on vacation), it is recommended to run a wash cycle
with no dishes inside, then you can disconnect the power plug
and the water supply.
• When the wash program is done, leave the door slightly ajar, so
that moisture and odors are not closed inside.
64
.