Setting The Clock - Sony Cyber-shot DSC-WX30 Gebrauchsanleitung

x To remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Note
• Never remove the memory card/battery pack when the access lamp (page 7) is lit.
This may cause damage to data in the memory card/internal memory.

Setting the clock

1
Press the ON/OFF (Power) button.
Date & Time setting is displayed when you turn on the camera for the first
time.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select a desired geographic location by following the
on-screen instructions, then touch [Next].
4
Set [Daylight Savings] or [Summer Time], [Date & Time
Format] and [Date & Time], then touch [Next].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Touch [OK].
6
Select the desired display color, following the
instructions on the screen, then touch [OK].
7
When an [In-Camera Guide] introductory message is
appeared on the screen, touch [OK].
ON/OFF (Power)
GB
GB
13