Brief Instructions - roco Z21 Detector X16 Benutzerhandbuch

Brief Instructions

NOTE: The green "Detect" LED indicates a change in one of the track sections by briefly flashing,
i.e. changes may also have occurred in several track sections at the same time which are not
displayed separately.
Programming button:
• Pressing for 2 seconds: Configuration starts and white
"Program" LED flashes
• Switch solenoid (e.g. turnout command) to the desired
address
• Address is taken over by the Z21
• If no entry is made, the programming mode is automati-
cally exited after 60 seconds
• Pressing for 8 seconds: Reset to factory settings
Status LED
flashes blue
illuminates blue normal operation
LED Detect
illuminates green Change in a track
LED Programm
blinkt Weiß
8010819920 .indd 15
- Detector X16
®
no R-Bus connection
with the control centre
section
waiting for
programming
Track supply
Inputs 1 – 8 Inputs 9 – 16
R-Bus
Z21 Detector X16
®_
15
07.01.2019 09:38:54