Motorola PMLN6765 Handbuch Seite 6

MN000804A01_a.book Page 4 Tuesday, May 20, 2014 2:17 PM
ATTACHING REMOTE PTT BUTTON
TO INTERFACE MODULE
1. Unscrew and remove the waterproof cap
attached to the external PTT terminal of
interface module.
2. Insert the optional remote PTT button into the
external PTT terminal.
3. Securely tighten the waterproof ring.
NOTE: Always ensure the waterproof ring is
securely tighten at all times, if the ring is
loose, waterproof function will be lost.
1
Figure 4. Attaching Remote PTT
IMPORTANT: When not in use, cover the external
3
2
PTT terminal with waterproof cap to
keep out dust and water.
4