Inhaltsverzeichnis
Werbung
18
9 eU-KOnFORmITÄTSeRKlÄRUng
We:
Yokogawa Process Analyzers Europe B.V.
Euroweg 2
3825 HD Amersfoort
The Netherlands
herewith declare under our sole responsibility that the product, model: SC24V
further specified with model suffix- and option codes: As listed in Annex-1 in this document
is manufactured in accordance with the requirements for CE-marking of products as stated in EC Decision:
768/2008/EC on a common framework for the marketing of products
by applying the following standards:
EN-ISO 9001: 2008
Subject product is:
In compliance with the essential requirements of the specific product legislation:
•
- Pressure Equipment
As amended by Regulation (EC) no. 1882/2003, by applying:
Article 3.3:
- RoHS
by applying:
Category 9:
- Explosive atmospheres
As amended by Regulation (EC) no. 1882/2003, by applying the following standards:
EN 60079-0: 2009
EN 60079-11: 2007
EN 60079-26: 2007
The provisions fulfilled are: II 1 G Ex ia IIC T3...T6 Ga
Number of the EC-type Examination Certificate: DEKRA 11 ATEX 0014 X
Name of the notified body: DEKRA Certification B.V.
Identification number of the notified body: 0344
Address of the notified body: Meander 1051, 6825 MJ Arnhem, The Netherlands
Produced according to appropriate quality control procedures.
•
The CE-mark has been affixed on the product in 2012 for the first time.
If applicable, the product is checked against the latest official released revision of the standards mentioned
above; differences do not affect the certified product identified on this declaration.
Annex-1
model Code Suffix Code Option Code Description
SC24V
Type
- ALN26
Sensor length
Further specifications can be found in General Specifications Sheet GS 12B6J7-02E-E.
Hinweis: Die übersetzte Tabelle finden Sie auf Seite 17.
IM 12B6J7-02D-E
EU DECLARATION OF CONFORMITY
Quality management systems - Requirements
Directive 97/23/EC (PED)
Sound Engineering Practice
Directive 2011/65/EU
Industrial monitoring and control instruments, ion selective electrode
Directive 94/9/EC (ATEX)
Explosive atmospheres – Part 0: Equipment – General requirements
Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i"
Explosive atmospheres – Part 26: Equipment with equipment protection
level (EPL) Ga
Amersfoort - July 01, 2014
H. Leijten
General Manager
Yokogawa Process Analyzers Europe B.V.
1/2
Combined 12mm 4-in-1 differential pH sensor with
Variopin connector. (pH/Ref, Temp, ORP)
Measurement Cell's pH-glass (L) and ref-glass (N),
non-flow reference, dome shape
- 120
120 mm
- 225
225 mm
YOKOGAWA
Werbung
Inhaltsverzeichnis
