Concept SR3340 Bedienungsanleitung Seite 25

EN
OPERATING INSTRUCTIONS
CAUTION
Before fixing or removing accessories, always pull the plug out of the electrical
socket!
Prior to using a new unit, wipe the surface with a wet cloth and wash the
removable accessories in warm water for hygienic reasons.
Never use different extensions simultaneously!
Whipping whisks and mixing hooks
The whipping whisks are designed to whip mousse, cream, and egg yolks, and
prepare toppings or thin batter for omelettes and pancakes.
The mixing hooks are designed for thicker batter, gingerbread or yeast dough, etc.
The maximum time of continuous operation (KB) is 5 minutes for speeds 1-5; for
TURBO, 1 minute. Let the unit cool down for at least 15 minutes afterwards.
1. Insert the whipping whisks or mixing hooks into the holes in the lower part of
the unit and turn them slightly to fix them properly.
Warning! Insert the whisk or mixing hook with the ring (Fig. 1) into the
larger hole!
2. Unwind the entire supply cable. Make sure it does not touch any nearby sources
of heat. Insert the plug into the electric voltage outlet.
3. Hold the appliance body with one hand and the whipping/mixing container
with the other.
4. Insert the whisks/mixing hooks into the container with the food and select
the required speed. By using the TURBO button, you may increase the motor
rotation speed to the maximum for a short time.
5. Switch off the unit after whipping/mixing. Disconnect the cable from the
socket.
6. Release the whipping whisks or mixing hooks using the extension release
button and rinse them immediately with warm running water.
Rod extension
The rod extension is designed for making sauces, toppings, soups, mayonnaise,
baby food, mixed drinks and milkshakes.
The maximum time of continuous operation (KB) is 30 seconds for speeds 1-5 and
TURBO. Let the unit cool down for at least 15 minutes afterwards.
Do not use the rod extension for any food with a temperature higher than
80°C! Do not use the rod extension for very hard food - i.e. for grinding
coffee beans, or processing ice, sugar, cereals, chocolate, etc.
1. Put the food in the mixing container or another, higher kitchen vessel.
2. Remove the cover in the rear of the unit. Mount the body of the unit on the
rod extension axis, and lock it by turning.
3. Unwind the entire supply cable. Make sure it does not touch any nearby
SR3340
Fig. 1
Fig. 2
23