Verifying Proper Installation (Microsoft Driver) - Belkin F5U222 Benutzerhandbuch

Note: Depending on the speed of your computer, it may take up to 30-60
seconds for the Notebook Card to be detected.
5. Windows will now search for drivers for the "Universal Serial Bus
Controller" and the "New Hardware Wizard" will start.
Click "Next".
6. Select "Search for suitable driver for my device (Recommended)". Click
"Next".
7. Select "Microsoft Windows Update". Click "Next".
Note: If the "Microsoft Windows Update" option is not available, double-check
your connection to the Internet. If you are having problems connecting to the
Internet, proceed to the "Installing the Belkin Driver" section.
8. The driver for "Universal Serial Bus Controller" will be located. Click
"Next".
9. The driver for "Standard Enhanced PCI to USB Host Controller" will now be
installed. Click "Finish".
The Installation procedure is now complete.

Verifying Proper Installation (Microsoft Driver)

After installation, check the Device Manager to confirm that the Notebook
Card has been properly installed.
1. Right-click the "My Computer" icon.
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device Manager" button.
4. Click the plus sign (+) next to "Universal Serial Bus Controllers".
Installation
EN
11 11