Installation Procedure For Windows Me - Belkin F5U222 Benutzerhandbuch

Installation

Installation Procedure for Windows Me

This installation procedure will install two USB 1.1 OHCI controllers, one USB
2.0 EHCI host controller, and the associated USB root hubs.
Note: Do not insert the Notebook Card into your computer until instructed to
do so.
EN
1. Insert the F5U222 installation CD into your CD-ROM drive. After a few
moments the main menu will automatically start.
2. Select "Install USB 2.0 Driver".
3. The setup utility will now install a CardBus eject utility for your USB 2.0
CardBus adapter. Take note of the information provided regarding the eject
utility, then click "Next" to continue.
4. After the driver is installed, select "Yes, I want to restart my computer
now." Click "Close".
5. After Windows restarts, locate your laptop computer's CardBus slot.
6. Insert the Notebook Card into the slot. Apply pressure as needed until it is
fully seated.
7. After the Notebook Card is inserted, Windows will detect "NEC USB Open
Host Controller (E13+)" and "Belkin USB 2.0 Hi-Speed Host Controller".
The required driver support will be automatically installed. No user input is
required.
8. After installation of the USB host controllers, the Windows OS will detect
"USB Root Hub" and automatically install the required driver support. This
step will repeat once again.
9. Restart your computer to complete the installation procedure.
8 8