Verifying Proper Installation (Windows 98 Se) - Belkin F5U222 Benutzerhandbuch

Verifying Proper Installation (Windows 98 SE)

Check the "Windows Device Manager" to confirm that your Notebook Card
has been properly installed.
1. Right-click on "My Computer" and select "Properties".
2. Select the "Device Manager" tab.
3. After installation of the Belkin USB 2.0 driver you will notice that an
additional "Universal Serial Bus Controllers" heading has been added to the
device list.
a) Click the plus sign (+) next to the original "Universal Serial Bus
Controllers" heading. You will find that two "NEC USB Open Host
Controller" entries and two "USB Root Hub" entries have been added to
the list of devices.
b) Click the plus sign (+) next to the new "Universal Serial Bus Controllers"
heading. You will find one entry for "Belkin USB 2.0 Hi-Speed Host
Controller" and one entry for "USB 2.0 Root Hub Device".
Note: If your computer features built-in USB ports, or if you have other USB
PCI controller cards installed, you will see additional USB controller and root
hub entries in the Device Manager list.
Installation
EN
7 7