Siemens SIRIUS 3TK2826 Betriebsanleitung Seite 4

3TK2826 - device restart
START
Switch off
supply voltage
Set configuration using
DIP switches
Switch on
supply voltage
All configuration LEDs ON
for approx. 1 s (LED test)
All configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON
according to set configuration
No
Configuration
OK?
Yes
Confirmation: SET/RESET
Press button for approx. 2s
Configuration LEDs flashing
according to set configuration
Check configuration
No
Configuration
OK?
Yes
Confirmation: SET/RESET
Press button for approx. 1s
Configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON for
approx. 2 s according to config.
Device switches into protective
operation
4
LEDs of the falsely set
DIP switches flicker
Set correct configuration
and press SET/RESET
for approx. 5 s
3TK2826 - display the configuration
Confirmation: SET/RESET
Press button briefly
All configuration LEDs ON
for approx. 1 s (LED-Test)
All configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON according to
configuration for approx. 5 s
Configuration LEDs OFF
3TK2826 - RESET in event of fault
Confirmation: SET/RESET
Press button for 5 s
Device restart
Ia
13 23 33 43 51
A1 Y12 T1 Y33 T3 1
SET / RESET
3TK2826-1BB40
Y22 T2 Y34 64 74 A2
14 24 34 44 52
13 23 33 43 51
A1 Y12 T1 Y33 T3 1
SET / RESET
3TK2826-1CW30
Y22 T2 Y34 63 64 A2
14 24 34 44 52
3ZX1012-0TK28-4DA1