Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection
Close the appliance.
Connect the cord on the appliance (depending on
model), then plug into the wall socket : the light
comes on.
During first use, the appliance may give off a slight
odour and smoke. This is normal.
Check that your electric installation is compatible
with the power and the voltage indicated under the
appliance.
Never use or plug in the appliance if :
- its power cord is faulty or damaged ;
- the appliance has been dropped ;
- it has visible damage or operating faults.
In such cases, to avoid any danger, contact your nearest
approved Service Centre. Never take the appliance
apart yourself. This will negate the guarantee.
Connect the appliance to a plug with an earth
connection.
Models with fixed cord : if the power supply cord is
damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in
order to avoid any risk of danger.
Depending on model, unlock the appliance from its
base.
Cooking
Depending on model, set the thermostat to the
position of your choice.
Allow the appliance to pre-heat :
• the light goes out when the correct cooking
temperature is reached.
and
• depending
on
indicates that the appliance has reached the
correct cooking temperature.
Before cooking.
Ready to start cooking.
Do not touch the hot surfaces of the appliance : use
the handles.
Do not leave the appliance switched on while
unattended.
model,
the
Thermosignal
Werbung
Inhaltsverzeichnis
