Initial Operation; Operation On The Appliance - Silvercrest SEK 2000 A1 Bedienungs- Und Sicherheitshinweise

3
Now fix the Curved electric built-in fire with
the additional short mounting plate
underside (see Fig. 3). Drill two more holes, 8 mm
diameter and 26 mm deep. Place the dowels
the holes once you have cleared them of debris.
Now fasten the short mounting plate
wall using the screws
with the screws .
8

Initial operation


The Curved electric built-in fire can be operated both
on the appliance itself and with the remote control
4
A B
88
SUN MON TUE WED THU FRI
88 : 88
I
on the
6
in
10
to the
6
and to the appliance
9
.
7
C
°C
D
SAT
ON
E
OFF
F
G
H
On/Off
A
Heating level indicator
B
Temperature display
C
Day display
D
Timer ON
E
Timer OFF
F
Window display
G
Brightness
H
Time display
I
The functions are shown on the display
on the front of the appliance.
Before using the appliance itself or the remote control
, the on/off switch
7
symbol lights up on the display and a signal
A
sounds when the appliance is switched on.

Operation on the appliance


5
ON/OFF
HEATING LEVEL TIMER
The appliance is operated via the control panel
on the top of the product (see Fig. 5).
- Switching on the Curved electric built-in fire:
Push this button to start the preheating process. The
fire begins to blaze.
- Setting system time/timer
Press this button to set the current time, day of the week
or timer. Use the "+" and "-" keys to set the weekdays.
Press the button again to set the hours. The minutes
can be set by pressing the button again. The symbols
and light up on the display and the set time is
D H
displayed.
(see Fig. 4)
3
must be operated. The
2
-
+
BRIGHTNESS
GB/IE/NI
1
13