Cleaning And Maintenance - RUSTA 903014040101 Gebrauchsanweisung

ENG

CLEANING AND MAINTENANCE

CAUTION! Always unplug the product from the electrical outlet and allow the warming
plate to cool completely before cleaning it. Never immerse the unit or power cord in water
or any other liquid for cleaning.
1. Clean all detachable parts after each use in hot, soapy water.
2. Wipe the product's exterior surface with a soft, damp cloth to remove any stains.
3. Water droplets may build up in the area above the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after each
use of the product.
4. Use a damp cloth to gently wipe the warming plate. Never use an abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
DESCALING
For optimal performance, your coffee maker should be descaled regularly. You should clean
away any mineral deposits left by the water periodically, depending on the water quality in
your area and how often the appliance is used. A good recommendation is after every 30-40
uses. We suggest decalcifying your coffee maker as follows: use a solution of white vinegar
and cold water. A solution of two tablespoons (30 ml) white vinegar in one coffee pot of cold
water works best.
1. Fill the tank with the vinegar solution to the maximum level as indicated on the water
gauge.
2. Place the glass coffee pot on the warming plate.
3. Make sure the paper filter (without ground coffee) and funnel are assembled in place.
4. Switch on the appliance and allow it to "brew" the de-scaling solution.
5. After "brewing" one cup of the solution, switch off the appliance.
6. Leave the solution to stand for 15 minutes and repeat step 3–5.
7. Switch on the appliance and run off the solution until the water tank is completely empty.
8. Rinse by operating the appliance with clean water at least 3 times.
6