ECG ERB 21420 W Bedienungsanleitung Seite 8

TRANSPORT AND RELOCATION
Transport and relocation
• Store the original packaging and foam polystyrene (PS) if they are needed.
• When transporting the appliance, secure with a wide strap or strong rope and follow the instructions on
the package.
• Before transport or relocation secure or remove all movable items (i.e. shelves, drawer for fresh fruit and
vegetables...).
Before switching on
• Leave the product to rest for at least 3 hours from the time it was transported to your home.
• You may detect a slight odour when you first switch it on. This odour will disappear once
the appliance starts to cool.
VARIOUS FUNCTIONS AND OPTIONS
Setting of the thermostat
The freezer and refrigerator thermostat automatically regulates the internal temperature. You can set lower
temperature by turning the knob from position 1 to 5.
Setting the freezer and refrigerator thermostat
0:
Off
1-2: For short-term storage of food in the freezer (knob from minimum to medium).
3-4:
For long-term storage of food in a freezer (knob to medium value).
5:
To freeze fresh foods. After reaching the cold state, it is necessary to set the knob to the previous
position.
Turn on the appliance
• On first switch-on, the appliance should be operated continuously for at least 24 hours until it has cooled
to a sufficient temperature.
• During this time do not open the door too often. Fill the appliance with foods.
• If you turn off or unplug the appliance, wait at least 5 minutes before restarting or turning it on to avoid
damage to the compressor.
8