Safety Notice - Crivit IAN 291813 Gebrauchsanweisung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Scope of Delivery (fig. A)
1 x main frame (1)
1 x footrest frame (2)
1 x sunroof (3)
2 x wheels (4)
2 x rod (5)
2 x screw long (6)
2 x screw short (7)
2 x washer (8)
2 x cap nut (9)
2 x pin (10)
1 x spanner (11)
1 x instructions for use
Technical Details
Weight: approx. 4.35kg
Dimensions: approx. 147 x 67 x 58cm
(L x W x H)
Max. load: 100kg
Max. loading capacity when used as a transport
aid: 20kg
Date of manufacture (month/year):
02/2018
Intended Use
The article is not designed for commercial use.
The article is intended for use in the leisure and
camping sector (outdoor area).
6 GB/IE/NI

Safety Notice

WARNING!
• Danger of suffocation for children!
• Never allow children to play with packaging
materials when unsupervised.
Danger of Injury!
• Do not place loads that exceed 100kg on the
article.
• Check the article before initial use for dam-
age or signs of wear and tear. Make sure that
all connecting elements are sufficiently tighten-
ed. The article may only be used when in
perfect condition!
• Tighten each individual screw before using
the article.
• Place the article only on solid, even ground.
• Risk of injury if article is incorrectly assem-
bled!
Danger of Bruised Fingers!
• The article may only be erected by
adults. Take care not to trap your fingers
when folding and unfolding the article.
Caution!
• Always supervise your children. The article is
not a toy or a climbing aid.
Make sure that nobody stands on the head or
foot sections of the article.
• The article can also be used as a transport
aid, although it is not designed for transpor-
ting people!
• Secure the product in extreme weather
conditions, e.g. strong winds. Store the
product in protected rooms.
Assembly
Footrest frame assembly
Note: Keep the lounger folded while assem-
bling the footrest frame.
1. Remove the cable binders and the packaging
material.
2. Pull the inner rod (1b) out of the main frame
(1a).
3. Insert the narrow ends of the inner rods into
the end of the footrest frame (2) until the holes
are directly above one another (fig. B).