Factory Settings - IME Nemo D4-Dc Bedienungsanleitung

Nemo D4-Dc
Level 5
5.0 Password 7321
Pressing at the same time the
increases the loaded value
↵
moves the cursor
confirms
Load Password 7321 and confirm
↵
confirms
5.1 Restore of company settings
It resets a possible calibration on site for voltage (level 3) and current (level 4) input.
12
+
keys , you display page:

Factory settings

Password 1000
Power demand delay time
Delay time: 15min
Energy pulse output
Weight pulses: 000.1kWh
Duration pulse: 0100ms
Display contrast
Selectable level: 010
RS485
Address: 255
Baud rate: 9600 bit/s
Parity: nonE
Time-out: 3mS
Alarms
Alarm 1
Associated quantity: current
Polarity: +
Decimal point: 4.000
Engineering unit: A
Threshold: 4.000
Alarm type: HIGH (max.)
State of relay: no
Hysteresis: 0
Intervention relay: 0
Reset delay: 0
Alarm 2
Associated quantity: current
Polarity: +
Decimal point: 4.000
Engineering unit: A
Threshold: 4.000
Alarm type: HIGH (max.)
State of relay: no
Hysteresis: 0
Intervention relay: 0
Reset delay: 0
Password 2001
Current input: 150mv
Primary shunt: 0010
11/15 10783400 WEB E cod.MF6DC420..