Problem Solving; Problems And Solutions - Candy PVS 604 R Bedienungs- Und Installationsanleitung

PROBLEM SOLVING

Cooki ng zones that do not
maintain a rolling boil or a fast
enough frying rate.
Foods cooking too slowly.
Tiny scratches (may appear as
cracks or abrasions) on the glass
surface of the hob.
Metal markings (may appear as
scratches).
Dark streaks or specks.
Areas of discoloration on hob.
Hot sugar mixtures / plastic
melted to the surface.
• You must use pans which are absolutely flat. If light
is visible between the pan base and a straight edge,
the surface unit will not transfer heat properly.
• Pan bases should closely match the diameter of the
heat zone selected.
• Improper cookware being used. Pan bases should
be flat, fairly heavy-weight and the same diameter as
the heat zone selected.
• Incorrect cleaning methods, cookware with rough
bases, or coarse particles (salt or sand) trapped
between the cookware and the surface of the hob.
Use recommended cleaning procedures, be sure
cookware bases are clean before use and use
cookware with smooth bases. Tiny scratches are not
removable but will become less visible in time as a
result of cleaning.
• Do not slide aluminium cookware across the sur-
face. Use a recommended cleaning procedure to
remove marks.
• If incorrect cleaning materials have been used or
spillage or grease stains remain on the surface use a
scraper and recommended cleaning product.
• Use a scraper and recommended cleaning product.
• Marks from aluminium and copper pans as well as
mineral deposits from water or food can be removed
with a cleaning cream.
• See the Glass Hob Cleaning section.
23