Danger; Controls And Safety Features; Controls; Work Area - JAC HF Originalanleitung

For machine operation, please refer to the "Operation" chapter.
5.5

Danger:

If the user or the machine is in danger, you must use the main isolator switch to cut the power supply
to the machine.
Keep clear of the tray proofers when they are in motion.
Remove the plug from the power socket before any maintenance and/or servicing work.
Any maintenance work or replacement of parts must be carried out by an approved agent.
6

CONTROLS AND SAFETY FEATURES

6.1

Controls:

Your machine is equipped as standard with a mechanical control panel (fig.3).
6.2

Work area:

The work area is located in front of the machine outfeed belt (fig.2, n°6).
6.3

Safety features:

This machine is equipped with the following safety features:
- A lever switch (fig.7, n°17) which stops the machine from operating if the chute is pulled forwards.
- An encoded magnetic switch (fig.7, n°18) which prevents the machine from starting if the front
housing is open.
- An emergency stop button (fig.3, n°7).
- On versions with a feed belt (optional), an encoded magnetic switch (fig.8, n°19) which stops the
machine from operating if the protective cover is raised (fig.8, n°20).
English
10