Usage Instructions; Use; Automatic Start - Zoef Robot BERTA Gebrauchsanweisung

Usage instructions

Observe the safety instructions!
1
Prepare the lawn
Ensure that there are not objects (pine cones, branches,
rocks, etc.) that may damage the robot or be ejected
by it. During the first mowing process, always set the
cutting height to MAX in order to avoid damage to the
boundary line! Cut the lawn to 4
first mowing.
2
3
Programme automatic start
or:
Manual start
Emergency deactivation: Push the STOP button
at once and turn off the robot in case of dangers,
accidents or if the appliance vibrates strongly.
The robot returns to the charging station on its own for
charging. Automatic resumption of mowing.
Rain sensor - Robot returns to the charging
station if it rains. Next start in the 48-hours
interval.
Robot stops automatically at inclinations of > 20°!
Collision sensor! Robot moves around
obstacles.
Danger of injury! Never reach into running
knives.
4
| 22 |
cm at most during
Set the cutting height
(2 - 6 cm)
Recommendation: Do not
set the cutting height too
short in try weather in order to
avoid drying out of the lawn!
Clean/store robot (-> p. 24)
Programme automatic start
After activation, the individual digits of the safety code
must be entered! First connect the mains. Completely
charge the robot before initial commissioning!
Activate
Reduce value
Enter the safety
code
Initial password: 0000.
Set and confirm individu-
al digits with arrows.
Set area
2
(50 - 600 m )
Determine
starting time
Set safety code
Set and confirm individual
digits with arrows. Emboss
safety code!
Setting time
Push the start button
Robot starts mowing. And the 48 hours interval is activated.
User Manual
Confirm input
Increase value