Dab Radio Mode - Revo SuperSignal Bedienungsanleitung

DAB RADIO MODE

GETTING READY FOR DAB OPERATION
Please ensure that the radio's antenna is extended before operation
in DAB Mode.
When you switch on SUPERSIGNAL for the fi rst time, it will automati-
cally perform a scan to see what stations are being braodcast in your
area, before storing them alphabetically in the radio's memory.
00:00 00:00
To enter DAB MODE, press the button until the DAB MODE intro
screen is displayed.
Scanning... 0 DAB Mode
It may be necessary to perform a FULL SCAN from time to time,
in order to update your radio's station list. This may be required for
any one of the following reasons:
1. Station availability can change from time to time as new stations
appear, or existing stations cease broadcasting.
2. Reception was poor during the initial automatic scan, if for
example the radio's antenna was not completely extended,
it may be that the station list is incomplete or even empty.
3. You have poor reception on some of the stations (resulting in
broken or poor quality audio), you may wish to list only stations that
have a strong signal strength.
To start a manual scan, press the button then select FULL SCAN
from the menu list.
When the scan is complete, your radio will list all available stations.
00:00
To remove stations that are listed but unavailable, press then
choose PRUNE. When asked whether you wish to "PRUNE?", select
Prune?
YES.
<No> Yes
08