Intended Use; Installation; Safety Notices - Powerfix Profi HG02350 Montageanleitung, Variationsmöglichkeiten

Multi-Purpose Table Set
Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. Familiarise yourself with the product
before using it for the first time. In addition,
please carefully refer to the operating instruc-
tions and the safety advice below. Only use the
product as instructed and only for the indicated
field of application. Keep these instructions in a
safe place. If you pass the product on to any-
one else, please ensure that you also pass on
all the documentation with it.

Intended use

The multi-function table set has three table
elements to use individually or together. It further
has four different table heights. The multi-function
Tables are multifunctional, e.g. for wallpapering,
parties, etc. They are easy to transport and fold
for space-saving storage. This product is only in-
tended for private household use, not for com-
mercial purposes.
Technical Data
Set-up dimensions
per section:
Table heights:
Load capacity
per table:

Safety Notices

FATAL INJURY AND ACCI-
DENT HAZARD FOR TODD-
approx. 100 x 60 cm
73 cm; 80 cm; 87 cm;
94 cm adjustment
max. 30 kg
RISK OF
LERS AND SMALL CHILDREN! Never
leave children unsupervised with the pack-
aging material. Suffocation hazard.
DANGER TO LIFE! During
installation keep children away from the
area in which you are working.
Make sure that the product is only assembled
by competent persons.
Be sure to place the product on a solid sur-
face at floor level.
CAUTION! Do not leave children unat-
tended! The product is not a climbing frame
or toy! Do not allow persons, particularly
children, to climb onto or lean against the
product. Otherwise the load on the product
may become unbalanced and cause it to
tip over. This may result in injury and / or
damage.
Store the product in a dry location, out of
the reach of children.
CAUTION! Do not lift or move the product
when weighed down in any way.
The load on the product must not
exceed 30 kg. Failure to observe
30 kg
this advice may result in injury
and / or product damage.
Only use the product in areas protected
from rain.
Do not use the product as a work platform.
Only fold the tables at the lowest height
setting.
Verify the spring bolts are firmly in place
before every use.
Dispose of defective, no longer usable
tables according the local regulations.

Installation

1. First unfold the table legs in pairs (see Fig. A).
2. Pull the hinges upwards until flat (see Fig. B).
3. Select the desired table height and lock in
place with the spring bolts (see Fig. C).
4. Use the brackets to connect the tables of
the same height (see Fig. D).
GB/MT 11