Time-Out Timer; Call Tones - Motorola XT420 Bedienungsanleitung

To program, connect the XT Series radio via
the Drop-in Charger Tray and CPS
Programming Cable as shown in Figure 1 on
page 32. Toggle the cable switch of the CPS
Programming Cable to 'CPS Mode'.
CPS allows you to program frequencies, PL/
DPL Codes as well as other features such as:
Time-out Timer, Scan List, Call Tones,
Scramble, Reverse Burst, etc. CPS is a very
useful tool as it can also lock the Front-Panel
Radio Programming or restrict any specific
radio feature to be changed (to avoid
accidentally erasing the preset radio values). It
also provides security by giving the option to
set up a password for profile radio's
management. For more information, refer to
Features Summary Chart Section at the end of
the User Guide.
Note: (*) CPS Programming Cable P/N#
HKKN4027_ is an accessory sold
separately. Please contact your Motorola
Solutions point of purchase for more
information.

Time-Out Timer

This timer sets the amount of time that the
radio can continuously transmit before the
transmission is automatically terminated. The
default setting is 60 seconds and can be
changed using the CPS.

Call Tones

Call Tones feature allows you to transmit an
audible tone to other radios on the same
channel to alert them that you are about to talk
or to alert them without speaking.
To use this feature, the Call Tones must be
programmed to either SB1 or SB2 and 1 of the
6 pre-recorded tones is selected.
33
English