lidl IAN 273338 Montage-, Bedienungs- Und Sicherheitshinweise Seite 53

Verify all parts and cables used meet the applicable regulations. This
will ensure safe and proper function. Also observe the instructions
for use of the devices used, e.g. the video monitor or recording
device.
Be sure not to overload mains sockets and extension cords. This
can lead to fire or electric shock.
Do not keep in damp, too cold or too hot environments. Avoid
contact with direct sunlight and strong artificial light. This can
damage the electronic circuitry.
Avoid strong shocks or impacts. This can damage the electronic
circuitry.
Do not open the camera. This is a maintenance-free camera. Your
warranty will be invalidated if you open the product.
Ensure that no lines are damaged during installation.
Only plug the power supply into an easy to access mains socket
so it is easy to unplug in an emergency.
Never touch the power supply with moist or wet hands. Otherwise
there is a risk of electric shock.
Only use the power supply in dry indoor spaces.
Never pull the device by its cable. Ever touch the device's casing.
Please remember the power supply will continue to draw a small
amount of electricity even without the camera being operated so
long as the power supply is plugged into the mains socket. Unplug
the mains plug from the mains socket to completely disconnect
from power.
Never open the power supply. Otherwise there is a risk of electric
shock.
Do not cover the power supply to prevent fires!
Immediately unplug the power supply from the mains socket if you
notice unusual noises or smoke.
Position the cable to avoid creating a trip hazard.
Protect all plugs connector from moisture.
GB 53