Operation; Settings - Silvercrest SHC 240 B2 Bedienungsanleitung

Operation

NOTE
► You may notice a slight smell when using the appliance for the first time.
This is normal and the smell dissipates after a short time.

Settings

NOTE
► All buttons except the Release button
beep when pressed.
1) Insert the plug into a mains power socket. You will hear a beep, and OFF
appears on the display.
2) Press the On/Off button
display
temperature is displayed. The appliance now heats up and the current tempera-
ture rises. As soon as the set temperature is reached, you will hear 2 beeps
and Temperature
NOTE
► The set temperature may be briefly exceeded occasionally and then drop
again. This happens because the appliance is trying to maintain the set
temperature and reheats repeatedly.
3) Press the Temperature button
the display. The temperature depends on your hair type:
Temperature
NOTE
► If you are not sure what temperature is ideal for your hair, increase the
temperature gradually. Start with a low temperature and increase the
temperature until you are happy with the result.
│ GB │ IE
■ 22
flashes. The set temperature flashes several times before the current
will light up permanently.
130°C
150°C
170°C
190°C
210°C
230°C
and the Start button
. You will hear a beep and the temperature
until the desired temperature appears on
Hair type
very fine, stressed and damaged hair
fine hair
normal hair
wavy hair
thick or wavy hair
thick, curly hair
sound a
SHC 240 B2