Directing laundry to the rear outfeed table
Fold the laundry guide plate back to the outfeed table.
Push the laundry return feed towards the outfeed table from the infeed side.
The ironed laundry will now be directed to the outfeed table.
Extension for outfeed table
The optional extension can be used to extend the laundry outfeed table by 132 mm.
Peak load/energy management
An option is available for connecting the ironer to a peak-load/energy management sys-
tem. If the peak-load/energy management system is active, the ironer's heater element
switches off and either or . flashes in the display. The residual heat in the heater
plate means that ironing can continue until the ironer goes into Pause mode ().
en - Optional accessories
85